The Belt Driven Saw
Click here to return to the Main Saw page
We offer a rigid mount and pivot mount belt drive saw for chain saw milling. These units are available to fit Husqvarna and Stihl bars. You are limited to a maximum of 10 teeth on your sprocket so the shaft speed needs to be around 8,000 rpm. We offer sprockets for .325, .375, and .404 chain for these units. If you are are using .375 chain it should be limited to between 10 to 15 hp.
The standard drive pulley for a 3,400 to 3,600 rpm motor to cut lumber should be 6" OD with 3 grooves for 3V section V-belts.
For more information please choose a model below
For a part list and drawing click on a part number
|DH0536||Large Husquvarna Bar Mount||$425.00|
|DH0553||Large Stihl Bar Mount||$534.75|
Parts and accessories for belt driven saws
|DH0554||Idler Assembly for use with DH0553||$477.56|
|6" Belt Pully with Bushing||$135.00|
|110VAC Bar Oil Pump||$218.00|
|1 Gallon Plastic Tank for use with Bar Oil Pump||$42.54|